Filter
Top Products
77
Video Switching
Chapter 3 Operations
The meanings of these items are as follows.
[X]: Specify the horizontal position.
[X]: Specify the vertical position.
After Step 1, you can specify the vertical or horizontal position by just
pressing the top, bottom, left, or right part of the positioner. (If you use the
positioner, there is no need to select [X] and [Y].)
When adjusting the position of the picture-in-picture image up, down, left, or
right, the image shifts in 10-point increments.
5
Press the MENU button to close the menu.
Using Fade-to-Black (FTB)
This fades the video in from or out to a black screen.
Press the FTB button.
This fades out the program output to a black screen, except for any superimposed
logo.
Press the FTB button once more to fade in the video from the black screen.
While the screen is black, the PGM selection buttons change to amber.
Fading in a different video after fading out
1
After fading to a black screen, select a different video with the PGM
selection buttons.
2
Press the FTB button.
This fades in the newly selected video.
Setting the Fade to Black transition time
1
Press the MENU button.
2
In the top menu, select [Fade To Black].
Note
Caution
Note
LOGO LOGO LOGO
LOGO LOGO LOGO