Filter
Top Products
Chapter 3 Operations
66
Video Switching
Changing the Video with a Cut
This switches the video instantaneously, with no added effects. This is the most
basic form of switching.
Basic operation for a video cut
There are two methods of making a cut, as follows.
• Switching directly by pressing a PGM selection button
• Checking the next video in the PVW viewer, then pressing the CUT button
The following diagram shows the flow of operations in carrying out a video cut.
Switching directly by pressing a PGM selection button
To switch from one video to another, you can simply press the PGM selection
button to which the new video is assigned.
1
In the source viewer, select the video for program output.
2
Press the PGM selection button with the same number as the selected video.
The PGM selection button you pressed lights red, and the selected video
appears in the PGM viewer.
The same video as shown in the PGM viewer is now output from the PGM
output connectors.
Press the PGM selection buttons to select the program
output video.
Press a different PGM
selection button to
switch the video.
Press a NEXT selection
button to select the next
output.
Press the CUT button .
Example: You may select video 4.
NEXT
INT
654321
PGM
Press button 4.