Filter
Top Products
Chapter 2 Preparations
62
Settings Related to Input Signals
3
1 Select the number of the MIC/LINE input connector to which is
connected the target audio signal, and confirm; 2 select [High(+4dB)], and
confirm.
In this example, both [MIC/LINE 1] and [MIC/LINE 2] are set to [High
(+4dB)].
4
Press the MENU button to close the menu.
If no input signal indication appears (when set to the default
microphone/line level of “Middle (-20 dB)”)
If no input signal indication appears in the source viewer even though an audio
signal is input, the microphone/line level is not reaching the reference level.
Using the same procedure as detailed in “If the peak indication appears” above,
select the number of the microphone/line input connector, and at step 3-2, select
[LOW (-44dB)], and confirm.
MIC/LINE 1 Middle
MIC/LINE 2 Middle
MIC/LINE 3 Middle
MIC/LINE 4 Middle
MIC/LINE 5 Middle
MIC/LINE 6 Middle
B High(+4dB)
Middle(-20dB)
Low(-44dB)
1
2