Filter
Top Products
Chapter 2 Preparations
48
Installation/Default Settings
Selecting the Video Output Signal Format
Select the format of the signal output from the PGM output connectors
(COMPOSITE/S VIDEO), SD video interface module DV connectors, and the
reference output connector on the rear panel.
1
Press the MENU button.
2
In the top menu, select [Video Output].
3
1 Select [PGM OUT], and confirm; 2 select the signal format, and
confirm.
4
Press the MENU button to close the menu.
Carrying out this selection may cause momentary breakup of the output video.
Video input in a different signal format than this setting can still be displayed
(i.e., displaying a PAL video input when set to “NTSC” or vice versa), but the
video quality cannot be guaranteed.
Caution
Note
PGM OUT NTSC
PGM OUT Level
RGB OUT SXGA (60 Hz)
B NTSC
PAL
1
2