Filter
Top Products
191
Setting Live Streaming Transmission
Chapter 3 Operations
“Helix Administrator” mentioned in the following procedure refers to the
configuration and administration screen for Helix Server.
1
Press the MENU button.
2
Select [Streaming] in the top menu.
3
1 Select [Server Setting] and confirm; 2 select [Ext (Account)] or [Ext
(Password)] and confirm;
The subsequent setting items differ for [Ext (Account)] and [Ext
(Password)].
It is now possible to configure [Server Address] and the items below.
4
1 Select [Server Address] and confirm; 2 enter the IP address of the
external server in the input box and confirm.
For [Ext (Password), enter the IP address of the unit (which is seen from the
external server when network address translation [NAT] is used) in
[Transmitter Address] of [Receiver] in the [Broadcast-Distribution] settings
of Helix Administrator.
5
1 Select [HTTP Port] and confirm; 2 enter the HTTP port set on the
external server in the input box and confirm.
Enter the HTTP port in [Ports] in the [Server Setup] settings of Helix
Administrator.
Note
Note
Note
Output
Stream Name
Size 320x240
Rate
Clip Information
Server Setting
Connection Check
Apply
Own
Ext (Account)
Ext (Password)
Server Address
HTTP Port
RTSP Port
12
Output
Stream Name
Size 320x240
Rate
Clip Information
Server Setting
Connection Check
XXX.XXX.XXX.XXX
8080
554
Apply
Own
Ext (Account)
Ext (Password)
Server Address
HTTP Port
RTSP Port
12
Output
Stream Name
Size 320x240
Rate
Clip Information
Server Setting
Connection Check
XXX.XXX.XXX.XXX
8080
554
Apply
Own
Ext (Account)
Ext (Password)
Server Address
HTTP Port
RTSP Port
12