Filter
Top Products
135
Controlling Cameras
Chapter 3 Operations
2
Control the camera to determine the shot.
3
With the jog roller, select the camera preset number (from 1 to 6), and
confirm.
The camera preset settings menu appears.
4
Set the following items as required.
Applying a name to the preset
1 Select [Data Name], and confirm; 2 enter the name in the input box, and
confirm.
5
Select [Preset], and confirm.
This saves the preset in the numeric button.
The saved preset appears in the camera guide menu.
Even if the camera guide menu is not displayed, you can register a camera
preset by holding down the Shift button and pressing any numeric button
(between 1 and 6).
Recalling a preset
1
Press the NEXT selection button to which the camera video is assigned.
The camera guide menu appears in the menu display.
2
Using the numeric buttons on the front panel, press the number in which the
preset is saved.
The numeric button lights amber, and the camera is set to the preset state.
Note
1 Center
2 Base Guitear
3 Drum
4 Right
5 Vocal
6
Preset
Delete
Data Name
[ xxxxxxxxxx ]
1
2
Enter up to 20
alphanumeric characters.
* The camera guide menu can only
display a limited number of
characters.
1 Center
2 Base Guitear
3 Drum
4 Right
5 Vocal
6
Preset Shift z+6
Delete
Data Name
789
456
1
0
2
3
ESC
ENTER
MENU
X
-
Y
REC
SHIFT
P
V
W
Hold down the Shift button, and
press one of numeric buttons 1 to 6.