Filter
Top Products
Chapter 3 Operations
134
Controlling Cameras
2
Following the guide, control the camera, using the front panel buttons and
dials.
Storing a Camera Preset
The camera preset function allows you to save the state of the camera supporting
VISCA protocol to one of the numeric buttons on the front panel. Then by
pressing the numeric button, you can automatically set the camera to the saved
state.
For example, during a lecture relay, you can store settings for standard shots,
such as a speaker close-up, speaker full-body shot, guest panel, or audience view,
simplifying the work of switching among these views.
In the camera preset, you can save the pan, tilt, zoom, and focus settings, the
aperture (iris) status, the white balance adjustment, the control mode (auto/
manual, etc.).
If the camera you are using is an EVI-D100/EVI-D100P, set the camera BACK
UP switch to the ON position before storing.
Storing a camera preset
1
Press the NEXT selection button to which the camera video is assigned.
The camera guide menu appears in the menu display.
Camera presets appear at the top of the camera guide menu.
Caution
56
23
ESC
MENU
X
-
Y
REC
SHIFT
JOG/SHUTTLE
Move the positioner for pan (moving the camera
shooting direction horizontally) and tilt (moving the
camera shooting direction vertically) control.
Hold down the SHIFT button and turn the jog dial to
adjust the iris (aperture). Turning clockwise opens the
iris, and turning counterclockwise stops down the iris
(when setting manually).
Turn the jog dial to adjust the focus. Turning clockwise
focuses further away, and turning counterclockwise
focuses closer (when setting manually).
Turn the shuttle dial to control the zoom. Turning clockwise
zooms in (telephoto), and turning counterclockwise zooms
out (wide angle).
Numeric button numbers
Data name
Camera preset