Filter
Top Products
137
Controlling Cameras
Chapter 3 Operations
Setting the Camera Control
To change the default settings of this unit, or to enable pan, tilt and zoom for a
ceiling-mounted camera, use the following procedure.
1
Press the NEXT selection button to which the camera video is assigned.
A camera guide menu appears in the menu display.
2
With the jog roller, select [Control Setup], and confirm.
The submenu appears.
3
Set the following items in the submenu.
Disabling remote control of pan and tilt, or zoom
1 Select [Pan/Tilt] or [Zoom], and confirm; 2 in the submenu select
[Disable], and confirm.
Reversing directions for ceiling-mounted cameras
When a camera is ceiling-mounted, you can reverse the pan and tilt
directions.
1 Select [Pan Reverse] or [Tilt Reverse], and confirm; 2 select [On], and
confirm.
Enabling manual focus and iris control
1 Select [Focus] or [Iris], and confirm; 2 select [Manual], and confirm.
Pan / Tilt Enable
Pan Reverse Off
Tilt Reverse Off
Zoom Enable
B Disable
Enable
1
2
Pan / Tilt Enable
Pan Reverse Off
Tilt Reverse Off
Zoom Enable
Off
B On
1
2
Pan / Tilt Enable
Pan Reverse Off
Tilt Reverse Off
Zoom Enable
Focus Auto
lris Auto
White Balance Auto
Disable
Auto
B Manual
1
2