Sony aws-g500 Camera Accessories User Manual


 
Appendix
218
Specifications
D-Sub 9-pin (Male) × 1,
RS-232C
FACTORY USE
(Provided for future functional expansion.)
D-Sub 15-pin
× 1 (Male),
Original Parallel I/O
MEMORY STICK
“Memory Stick” Slot
“Memory Stick Pro” and
“Memory Stick Pro Duo” are
not supported.
VISCA DIN 8-pin type
× 1, RS-232C
Sony VISCA camera
commands are supported.
LCD 15.4” High Brightness LCD,
WXGA (1,280
× 800 60 Hz)
Speaker Built-In Speaker
× 2,
Size: 20
× 40 mm
SUPPLIED ACCESSORIES
CD-ROM (× 1)
Notes on using the CD-ROM (
× 1)
Pin to BNC connector (
× 4)
Battery: CR2032
Operating instruction (
× 1)
Keyboard (
× 1) 85 keys + Pointer /
Infrared communication
Powered from
AWS-G500: +5 V
Battery operation: CR2032 or
2032 H
× 2
OPTIONAL ACCESSORIES
BKAW-550 PC Video Interface Module
(mounted in slot 3 of this unit)
RGB D-Sub Shrink 15-pin
Type
× 2 (Female),
XGA (60 Hz, 75 Hz),
SXGA (60 Hz, 75 Hz)
BKAW-570 SD Video Interface Module
(mounted in slots 1 and 2 of this unit)
Composite BNC type
× 2
Video: 1.0 Vp-p, 75 ,
Sync negative
S-video DIN type
× 2
Y: 1.0 Vp-p, 75 ,
Sync negative
C: 0.286 Vp-p at burst, 75,
(NTSC)
C: 0.3 Vp-p at burst, 75 ,
(PAL)
DV IN/OUT i.LINK: IEEE 1394 6-pin Type
× 2
IEC 61883-2 equiv.
HDD i.LINK: IEEE 1394 6-pin
Type
× 1
HDD IF: SBP2
BKAW-580 serial digital interface module
SDI IN BNC × 2
VIDEO: 800 m Vp-p (75 O)
SMPTE259M-C ITU-R656
compliant
AUDIO:
Audio sampling rate:
20 bit 48 kHz 2 channels
(channels 1 and 2 or 3 and 4)
SMPTE272M-A compliant
SDI OUT* BNC × 1
VIDEO: 800m Vp-p (75 O)
SMPTE259M-C ITU-R656
compliant
AUDIO:
Audio sampling rate:
20 bit 48 kHz 2 channels
(channels 1 and 2)
SMPTE272M-A compliant
HDD HDD i.LINK: IEEE 1394 S400
(6 pins) × 1
HDD IF: SBP2
* The output may be limited when this module is
used in combination with other interface
modules provided in the future.
Due to the internal video processing of
AWSG500, the output SDI signal is not
guaranteed to be identical to the input SDI signal.
Recommended power cord
NA Part No. 1-551-812-11
Europe Part No. 1-782-929-22
Design and specifications are subject to change
without notice.
Caution