Filter
Top Products
59
Settings Related to Input Signals
Chapter 2 Preparations
Audio Signal Related Settings
These are preparations for handling audio signals on the unit.
Assigning audio input signals to channel faders
Assign audio signals input from the audio input connectors or signals input from
the interface modules of the rear panel to channel faders 1 to 6.
If you assign different audio signals to the left and right channels (L/R) of the
channel faders, they become stereo faders, and if you assign the same audio
signal to both channels, they become monaural faders.
If you assign DV signals or SDI signals, they become stereo faders.
1
Press the MENU button.
2
In the top menu, select [Audio Input Assign].
3
Select the channel fader number from the list, and confirm, then set the
following items in the submenu.
Assigning a name
Assign a name to the audio signal. The name assigned here appears in the
source viewer with the same number as the channel fader.
1 Select [Source Name], and confirm; 2 enter the name in the input box,
and confirm.
Specifying an audio input connector
Specify the audio signal to be assigned to the channel fader. For stereo audio,
specify the source for each of the left and right channels separately.
For monaural audio, specify the same input for both left and right channels.
1 Select [Input (L)], and confirm; 2 select the audio input connector from
the list, and confirm.
Caution
1
2
3
4
5
6
Source Name MICI
Input (L) MIC/LINE
Input (R) Assign(R)
[
MIC1
]
1
2
Enter up to 20
alphanumeric characters.
* The source viewer can only
display a limited number of
characters.
1
2
3
4
5
6
Source Name MIC1
Input (L) MIC/LINE1
Input (R) MIC/LINE1
B MIC/LINE 1
MIC/LINE 2
MIC/LINE 3
MIC/LINE 4
MIC/LINE 5
MIC/LINE 6
LINE 7
LINE 8
SLOT1 DV IN1
SLOT1 DV IN2
1
2