Filter
Top Products
43
Installation/Default Settings
Chapter 2 Preparations
Using the keyboard away from the unit
You can use the keyboard away from the unit. In this case, it is necessary to insert
a pair of standard batteries (CR2032) to power the keyboard.
Detaching the keyboard
Using the groove locating at the right of the keyboard space, lift the keyboard out.
Inserting batteries in the keyboard
1
Detach the keyboard from the main unit.
2
Detach the battery holder from the keyboard.
To remove the battery holder, use the end of a sharp implement such as a pen.
3
Load two batteries (CR2032) in the battery holder, and insert in the
keyboard.
If batteries are inserted incorrectly, this may lead to electrolyte leakage or
other damage. Note the following carefully.
• Check that the polarity is correct.
• Do not use new and old batteries together, or batteries of different types.
• Do not attempt to charge the batteries.
• When not using the keyboard for a long period, remove the batteries.
• If a battery should leak, remove any spilled fluid from the battery holder,
before inserting a new battery.
Caution
Caution
Make sure the
positive (+)
terminal of
each battery is
facing upward.