Filter
Top Products
Chapter 2 Preparations
41
Installation/Default Settings
Chapter
2
Preparations
Installation/Default Settings
This section describes the procedure for installing the unit, connecting the power
cord, starting up the system, and setting the date, time, and video output signal
format.
Installing the Unit
Install the unit in a level place. The unit weighs about 17.7 lbs (8 kg). Check that
the installation location is strong and spacious enough to accommodate the unit
before installing.
There are ventilation holes on both sides of the unit. To ensure adequate air flow,
there must be a space of at least 12 inches (300 mm) on each side of the unit.
Connecting the power
Connect the power cord to the power inlet on the unit and the wall outlet.
Num
Caps
12 inches
(300 mm)
12 inches
(300) mm
AC IN
LINE MIC/LI
N
8765
4