Filter
Top Products
189
Setting Live Streaming Transmission
Chapter 3 Operations
Setting the Streaming Output Path
If multiple encoders connect to the streaming server, enter the path for
identification. Set the path as necessary.
1 Select [Stream Name] and confirm; 2 select [Path] and confirm; 3 enter
the path following the default mount point (/broadcast/) in the input box and
confirm.
Example:
If “anycast/test” was entered, access and view material by entering rtsp://
xxx.xxx.xxx.xxx/broadcast/anycast/test/xxx.rm on a client.
Setting the video size
1 Select [Size], and confirm; 2 select the size of video to be output, and confirm.
Setting the transfer rate
1 Select [Rate], and confirm; 2 select [Bit Rate], and confirm; 3 select the transfer
rate, and confirm.
• The actual transfer rates are as follows.
768k DSLt700 kbps(Video:603.5 kbps Audio:96.5 kbps)
512k DSLt450 kbps(Video:353.5 kbps Audio:96.5 kbps)
384k DSLt350 kbps(Video:285.9 kbps Audio:64.1 kbps)
256k DSLt225 kbps(Video:180.9 kbps Audio:44.1 kbps)
150k LANt150 kbps(Video:118.0 kbps Audio:32.0 kbps)
64k ISDNt50 kbps(Video:39.0 kbps Audio:11.0 kbps)
56k Dial-upt34 kbps(Video:26.0 kbps Audio:8.0 kbps)
Notes
Output Live
Stream Name
Size 320x240
Rate
Clip Information
File Name
Path
[
XXXXXXXXXX
]
Enter up to 50 alphanumeric characters.
123
Output Live
Stream Name
Size 320x240
Rate
Clip Information
B 320 x 240
240 x 180
160 x 120
12
Output Live
Stream Name
Size 320x240
Rate
Clip Information
Bit Rate 384k DSL 768k DSL
512k DSL
384k DSL
256k DSL
150k LAN
64k ISDN
56k Dial-up
123