Filter
Top Products
57
Settings Related to Input Signals
Chapter 2 Preparations
Video Signal Related Settings
These are preparations for handling video signals or the unit.
Assigning video input signals to the selection buttons
Assign video signals to the selection buttons 1 - 6 (PGM selection and NEXT
selection buttons).
1
Press the MENU button.
2
In the top menu, select [Video Input Assign].
3
From the list select the number of the selection button, and confirm, then set
the following items in the submenu.
Assigning a name for the video
Assign a name for the video. The name assigned here appears in the source
viewer with the same number as the selection button.
1 Select [Source Name], and confirm; 2 enter the name in the input box,
and confirm.
Specifying a video input connector
Specify the video input to be assigned to the selection button is input.
1 Select [Input], and confirm; 2 select the video input connector from the
list, and confirm.
1
2
3
4
5
6
Source Name CAM1
Input S1-1 Composite
Control Off
[
CAM1
]
1
2
Enter up to 20
alphanumeric characters.
* The source viewer can only
display a limited number of
characters.
1
2
3
4
5
6
Source Name CAMERA1
Input S1-1 Composite
Control Off
No Assign
B SLOT1 IN1 Composite
S-Video
DV
SLOT1 IN2 Composite
S-Video
DV
SLOT2 IN1 Composite
S-Video
DV
SLOT2 IN2 Composite
S-Video
DV
SLOT3 IN1 RGB
SLOT3 IN2 RGB
1
2