Filter
Top Products
45
Installation/Default Settings
Chapter 2 Preparations
This closes down the operating software, and powers off.
It takes a little while before the power turns off after the screen disappears.
If you hold down the power button for at least 4 seconds, this forces a shutdown.
After a forced shutdown, the settings of the unit may not be preserved.
Using the timer to shut down the system/Releasing the timer setting
1
While the Anycast Station main software is running, hold down the keyboard
Alt and Ctrl keys, and press the T key.
The following confirmation message appears.
It is not possible to use this function while the text typing tool software is
running.
2
To set the timer, press the ENTER button.
To release the timer, press the ESC button.
When setting the timer
The timer indication appears to the right of “LOCAL TIME”.
When the text entry tool is started, the timer display disappears, but the timer
function continues to operate.
The countdown appears from -120 min.
After two hours the system is powered off.
When releasing the timer
The timer display disappears.
Caution
Note
Note