Filter
Top Products
167
Video/Audio Signal Adjustments and Settings
Chapter 3 Operations
This menu graphically displays the output destination for each channel set in
“Determining the Audio Signal Output Destinations” (page 156).
3
1 Select the item you wish to adjust the level, and confirm; 2 adjust with
the slider.
The items for which you can adjust the level are as follows.
[AUX1 OUT Level]: Sets the output level for the audio output from the
AUX1 connector.
[AUX2 OUT Level]: Sets the output level for the audio output from the
AUX2 connector.
[MIX OUT Level]: Sets the output level for the audio from the MIX output.
Adjust the audio level output from the PGM audio output connectors using
the PGM fader on the front panel (page 141).
4
Press the MENU button to close the menu.
If the Output Video Is Delayed with Respect to the Audio
If the output video is delayed with respect to the audio, by delaying the audio you
can resynchronize it with the video.
1
Connect monitor devices to the PGM video output connectors.
2
Connect devices to the PGM/AUX/MIX audio output connectors.
3
Press the MENU button.
Note
Note
Output destination indication
PGM Delay 2F
AUX1 Delay 2F
AUX1 OUT Level 0dB
AUX2 Delay 2F
AUX2 OUT Level 0dB
MIX OUT Delay 2F
MIX OUT Level
1
2