Sony aws-g500 Camera Accessories User Manual


 
Chapter 3 Operations
142
Recording Video and Audio on an External Device
Recording Video and Audio on an External Device
If you use the DV connector and i.LINK connector of the SD interface module
(BKAW-570) or the PGM SDI output connector and i.LINK connector of the
serial digital interface module (BKAW-580), the program output from the unit
and sources input to the unit can be recorded on a VTR or external hard disk.
The DV connector, i.LINK connector, and PGM SDI output connector support
different devices and recording data.
DV connector (DV IN/OUT DV PGM): connect a VCR, to record the program
output video and audio.
i.LINK connector (HDD): connect an external hard disk, to record the video and
audio input (page 144).
PGM SDI output connector (SDI OUT): connect an SDI input compatible
VTR to record program output video and audio.
If a signal subjected to special processing is input to the synchronization signal,
normal recording may not be possible.
Recording Program Output on a VCR
When using the DV connector
By connecting a VCR to the DV connector (DV IN/OUT) of the SD interface
module (BKAW-570) on the rear panel, you can record the program output video
in DV format.
Procedure for recording on a VCR
To begin recording to a VCR, select the DV connector to be used for recording.
If a DV connector is set to be used for recording, the recording of material input
from the composite video input connector and S-video input connector of the
same module is no longer possible.
1
Connect the VCR to the DV connector.
Depending on the model of VCR, signal input/output settings may be
required. Refer to the Operating Instructions for the device to be connected.
2
Press the MENU button.
3
In the top menu, select [DV Output].
Note
Caution
Caution
Note