Filter
Top Products
Chapter 1 Overview
28
Names and Functions of Parts
4 Source viewer
a Thumbnails
These show the video assigned to the selection
buttons at 160 × 120 pixels, at 10 fps (8 to 9 fps for
PAL).
b Source number
This is the number (1 to 6 and INT) assigned to the
source (video or audio).
These correspond to the PGM selection button, the
NEXT selection button, and the audio channel
fader numbers.
c Audio source name
This shows the name of the audio signal assigned
to the channel fader (page 59) or the file name on
the external hard disk (page 147).
d Video source name
In viewers 1 to 6, this shows the name of the video
signal assigned to the selection button (page 57) or
the file name on the external hard disk (page 147).
For the INT viewer, this displays the color matte
and color bars, or the graphics file name selected
in the INT source selection menu.
e Input signal indication
If the input level of the audio assigned to a channel
fader is -60 dBFS or more, this lights green, and
you can check that there is an audio input.
For stereo you can check left and right channels
separately; for monaural both channels are shown
the same.
f Peak indication
If the input level of the audio assigned to a channel
fader is -8 dBFS or more, this lights red.
For stereo you can check left and right channels
separately; for monaural both channels are shown
the same.
g Selection frame
Depending on the selection state, the frame color
changes.
Red: video selected with PGM selection button
Amber: video selected with NEXT selection
button
Green: video selected with NEXT selection
button when the KEY button is lit (video with
a key inserted)
h Device status
The content displayed differs as follows
depending on the material.
Video from a VISCA-compatible camera
being controlled remotely
Displays the VISCA-compatible camera’s status.
No Response: communication cannot be
established with the camera.
Initializing: appears at system startup and during
camera reset.
INT graphics file
Loading:while file is loading
When playing a file on the external hard
disk
The status of file operation is shown.
1 Thumbnails
2 Source number 3 Audio source name 4 Video source name
5 Input signal indication
6 Peak indication
8 Device status 7 Selection frame 9 Hard disk status
Play position
Corresponding hard
disk number
Timecode
File operation