Filter
Top Products
CHAPTER
6-1
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
OL-30644-01
6
Configuring Radio Settings
This chapter describes how to configure radio settings for the wireless device. This chapter includes the
following sections:
• Enabling the Radio Interface, page 6-2
• Configuring the Role in Radio Network, page 6-3
• Point-to-point and Multi Point bridging support for 802.11n platforms, page 6-6
• Configuring Radio Data Rates, page 6-9
• Configuring MCS Rates, page 6-12
• Configuring Radio Transmit Power, page 6-13
• Configuring Radio Channel Settings, page 6-15
• Enabling and Disabling World Mode, page 6-22
• Disabling and Enabling Short Radio Preambles, page 6-22
• Configuring Transmit and Receive Antennas, page 6-23
• Enabling and Disabling Gratuitous Probe Response, page 6-25
• Disabling and Enabling Aironet Extensions, page 6-25
• Configuring the Ethernet Encapsulation Transformation Method, page 6-26
• Enabling and Disabling Reliable Multicast to Workgroup Bridges, page 6-27
• Enabling and Disabling Public Secure Packet Forwarding, page 6-29
• Configuring the Beacon Period and the DTIM, page 6-31
• Configure RTS Threshold and Retries, page 6-31
• Configuring the Maximum Data Packet Retries, page 6-32
• Configuring the Fragmentation Threshold, page 6-33
• Enabling Short Slot Time for 802.11g Radios, page 6-33
• Performing a Carrier Busy Test, page 6-34
• Configuring VoIP Packet Handling, page 6-34
• Configuring ClientLink, page 6-37
• Debugging Radio Functions, page 6-38