Filter
Top Products
12-13
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
OL-30644-01
Chapter 12 Configuring WDS, Fast Secure Roaming, Radio Management, and Wireless Intrusion Detection Services
Configuring WDS
Step 6 Check the Authentication Settings check box. The fields in the Authentication Settings area get
enabled.
Step 7 For the RADIUS protocol, in the Shared Secret field, enter a shared secret value. This value will be
entered identically on the WDS device when configuring the ISE as a RADIUS server.
Step 8 Click Submit to validate your entries.
Step 9 Repeat Step 3 to Step 8 for each WDS device candidate.
Step 10 Choose Administration > Identities Management > Identities.
The Network Access Users page appears.
Note This procedure shows configuration of users in the ISE internal database. ISE can also use an
external database. Please see the ISE guide for more details.
Step 11 Click Add to add a new user.
Figure 12-8 Network Access Users page
Step 12
In the Name field, enter the username configured for the access point client to the WDS.
Step 13 In the Password and Confirm Password fields, enter the exact same password that you entered on the
access point on the Wireless Services AP page.
Step 14 Click Submit.
Step 15 Repeat Step 11 to Step 14 for each access point that uses the WDS device.