Filter
Top Products
C-19
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
OL-30644-01
Appendix C Error and Event Messages
802.11 Subsystem Messages
Error Message DOT11-4-TKIP_REPLAY: “TKIP TSC replay was detected on a packet (TSC
0x%ssx received from %e).”
Explanation
TKIP TSC replay was detected on a frame. A replay of the TKIP TSC in a received
packet almost indicates an active attack.
Recommended Action None.
Error Message DOT11-4-WLAN_RESOURCE_LIMIT: “WLAN limit exceeded on interface %s and
network-id %d.”
Explanation
This access point has reached its limit of 16 VLANs or WLANs.
Recommended Action Unconfigure or reduce static VLANS if access point is trying to associate with
RADIUS assigned Network-ID turned on.
Error Message SOAP-3-WGB_CLIENT_VLAN_SOAP: “Workgroup Bridge Ethernet client VLAN
not configured.”
Explanation
No VLAN is configured for client devices attached to the workgroup bridge.
Recommended Action Configure a VLAN to accommodate client devices attached to the workgroup
bridge.
Error Message DOT11-4-NO_VLAN_NAME: “VLAN name %s from RADIUS server is not
configured for station %e.”
Explanation
The VLAN name returned by the RADIUS server must be configured in the access
point.
Recommended Action Configure the VLAN name in the access point.
Error Message DOT11-4-NO_VLAN_ID: “VLAN id %d from Radius server is not configured
for station %e.”
Explanation
The VLAN ID returned by the Radius server must be configured on the access point.
Recommended Action Configure the VLAN ID on the access point.
Error Message SOAP-3-ERROR: “Reported on line %d in file %s.%s.”
Explanation
An internal error occurred on the indicated line number in the indicated filename in the
controller ASIC.
Recommended Action None.