Filter
Top Products
Contents
6
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
OL-29225-01
Configuring Dual-Radio Fallback 6-7
Radio Tracking 6-8
Fast Ethernet Tracking 6-8
MAC-Address Tracking 6-8
Configuring Radio Data Rates 6-9
Access Points Send Multicast and Management Frames at Highest Basic Rate 6-9
Configuring MCS Rates 6-12
Configuring Radio Transmit Power 6-13
Limiting the Power Level for Associated Client Devices 6-15
Configuring Radio Channel Settings 6-15
Channel Widths for 802.11n 6-16
Dynamic Frequency Selection 6-17
Radar Detection on a DFS Channel 6-19
CLI Commands 6-19
Confirming that DFS is Enabled 6-19
Configuring a Channel 6-20
Blocking Channels from DFS Selection 6-20
Setting the 802.11n Guard Interval 6-21
Enabling and Disabling World Mode 6-22
Disabling and Enabling Short Radio Preambles 6-22
Configuring Transmit and Receive Antennas 6-23
Enabling and Disabling Gratuitous Probe Response 6-25
Disabling and Enabling Aironet Extensions 6-25
Configuring the Ethernet Encapsulation Transformation Method 6-26
Enabling and Disabling Reliable Multicast to Workgroup Bridges 6-27
Enabling and Disabling Public Secure Packet Forwarding 6-29
Configuring Protected Ports 6-30
Configuring the Beacon Period and the DTIM 6-31
Configure RTS Threshold and Retries 6-31
Configuring the Maximum Data Packet Retries 6-32
Configuring the Fragmentation Threshold 6-33
Enabling Short Slot Time for 802.11g Radios 6-33
Performing a Carrier Busy Test 6-34
Configuring VoIP Packet Handling 6-34
Configuring ClientLink 6-37
Using the CLI to Configure ClientLink 6-38
Debugging Radio Functions 6-38