Filter
Top Products
C-22
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
OL-30644-01
Appendix C Error and Event Messages
Local Authenticator Messages
Error Message RADSRV-4-NAS_KEYMIS: NAS shared key mismatch.
Explanation
The local RADIUS server received an authentication request but the message signature
indicates that the shared key text does not match.
Recommended Action Correct the shared key configuration on either the NAS or on the local
RADIUS server.
Error Message RADSRV-4_BLOCKED: Client blocked due to repeated failed
authentications
Explanation
A user failed authentication the number of times configured to trigger a block, and the
account been disabled.
Recommended Action Use the clear radius local-server user username privileged EXEC command
to unblock the user, or allow the block on the user to expire by the configured lockout time.
Error Message
Error Message DOT1X-SHIM-6-AUTH_OK: “Interface %s authenticated [%s].”
Explanation
The 802.1x authentication was successful.
Recommended Action None.
Error Message DOT1X-SHIM-3-AUTH_FAIL: “Interface %s authentication failed.”
Explanation
The 802.1x authentication failed to the attached device.
Recommended Action Check the configuration of the 802.1x credentials on the client as well as the
RADIUS server.
Error Message DOT1X-SHIM-3-INIT_FAIL: “Unable to init - %s.”
Explanation
An error occurred during the initialization of the shim layer.
Recommended Action
Error Message DOT1X-SHIM-3-UNSUPPORTED_KM: “Unsupported key management: %X.”
Explanation
Am error occurred during the initialization of the shim layer. An unsupported key
management type was found.
Recommended Action None.