Cisco Systems OL-29225-01 Film Camera User Manual


 
8-11
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
OL-30644-01
Chapter 8 Configuring Spanning Tree Protocol
Configuring STP Features
interface GigabitEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
bridge-group 1
no bridge-group 1 source-learning
!
interface BVI1
ip address dhcp client-id GigabitEthernet0
no ip route-cache
ipv6 address dhcp
ipv6 address autoconfig
ipv6 enable
!
bridge 1 priority 9000
bridge 1 protocol ieee
bridge 1 route ip
!
line con 0
line vty 0 4
login local
transport input all
!
end
Non-Root Bridge Without VLANs
This example shows the configuration of a non-root bridge with no VLANs configured with STP
enabled:
hostname client-bridge-north
!
dot11 syslog
!
dot11 ssid visitor
!
dot11 ssid visitor2
!
dot11 guest
!
bridge irb
!
interface Dot11Radio0
no ip address
no ip route-cache
!
ssid visitor
!
antenna gain 0
stbc
station-role non-root
bridge-group 1
!
interface Dot11Radio1
no ip address
no ip route-cache
!
ssid visitor2
!