Filter
Top Products
-xix
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
OL-30644-01
Preface
Audience
This guide is for the networking professional who installs and manages Cisco Aironet Access Points in
Autonomous mode. To use this guide, you should have experience working with the Cisco IOS software
and be familiar with the concepts and terminology of wireless local area networks.
The guide covers Cisco IOS Releases 15.3(3)JAB. The following access point platforms are supported:
• AP 802
• AP 1040
• AP 1140
• AP 1260
• AP 1530
• AP 1550
• AP 1600
• AP 1700
• AP 2600
• AP 2700
• AP 3500
• AP 3600
• AP 3700
Note This guide does not cover lightweight access points. Configuration for these devices can be found in the
appropriate installation and configuration guides on Cisco.com.
Purpose
This guide provides the information you need to install and configure your access point. This guide
provides procedures for using the Cisco IOS software commands that have been created or changed for
use with the access point. It does not provide detailed information about these commands. For detailed
information about these commands, refer to the Cisco IOS Command Reference for Cisco Aironet Access