Cisco Systems OL-21636-01 Security Camera User Manual


 
5-19
Cisco IP Solution Center L2VPN and Carrier Ethernet User Guide, 6.0
OL-21636-01
Chapter 5 Creating a FlexUNI/EVC ATM-Ethernet Interworking Policy
Enabling Template Association
See the section Enabling Template Association, page 5-19 for information about this feature.
Step 21 To save the FlexUNI/EVC policy, click Finish.
To create a service request based on a FlexUNI/EVC ATM-Ethernet Interworking policy, see Chapter 6,
“Managing a FlexUNI/EVC ATM-Ethernet Interworking Service Request.”
Enabling Template Association
The ISC template feature gives you a means to download free-format CLIs to a device. If you enable
templates, you can create templates and data files to download commands that are not currently
supported by ISC.
Step 1 To enable template association for the policy, click the Next button in EVC Policy Editor - Interface
Attribute window (before clicking Finish).
The Template Association window appears. In this window, you can enable template support and,
optionally, associate templates and data files with the policy. For instructions about associating
templates with policies and how to use the features in this window, see
Appendix B, “Working with
Templates and Data Files”.
Step 2 When you have completed setting up templates and data files for the policy, click Finish in the Template
Association window to close it and return to the Policy Editor window.
Step 3 To save the FlexUNI/EVC ATM-Ethernet Interworking policy, click Finish.
To create a service request based on a FlexUNI/EVCATM-Ethernet Interworking policy, see Chapter 6,
“Managing a FlexUNI/EVC ATM-Ethernet Interworking Service Request.”