Cisco Systems OL-21636-01 Security Camera User Manual


 
7-10
Cisco IP Solution Center L2VPN and Carrier Ethernet User Guide, 6.0
OL-21636-01
Chapter 7 Creating an L2VPN Policy
Defining an Ethernet ERS (EVPL) Policy without a CE
Figure 7-7 Ethernet ERS (EVPL) without CE Policy Attributes
Step 2 Choose a N-PE/U-PE Interface Type from the drop-down list.
You can choose a particular interface as a CE, N-PE, or U-PE interface based on the service provider’s
POP design. The interfaces are:
ANY (Any interface can be chosen.)
Port-Channel (A bundle of ports that share the same characteristics—this gives the service provider
the ability to aggregate bandwidth and protection.)
Ethernet
FastEthernet
GE-WAN
GigabitEthernet
TenGigabitEthernet
TenGigE
The value defined here functions as a filter to restrict the interface types an operator can see during
L2VPN service request creation.
Step 3 Check the Standard UNI Port check box to enable port security.
This is the default. When you uncheck the check box, the port is treated as an uplink with no security
features, and the window dynamically changes to eliminate items related to port security.