Cisco Systems OL-21636-01 Security Camera User Manual


 
13-9
Cisco IP Solution Center L2VPN and Carrier Ethernet User Guide, 6.0
OL-21636-01
Chapter 13 Generating L2 and VPLS Reports
L2 and VPLS Reports
VPLS_EWS_NO_CE
VLAN ID—VLAN identification number.
AccessDomain—Access domain name.
Output Values:
VPLS Link ID—VPLS link identification number.
SR ID—Service request identification number
SR Job ID—Service request job identification number.
SR State—Service request state.
Note The SR State output does not list service requests in the CLOSED state. Service requests in
other states are listed, as determined by the filter values.
Customer Name—Name of the customer.
VPN—Name of the VPN.
Service Type—Type of service.
VLAN ID—VLAN identification number.
Policy Name—Name of the VPLS policy.
VFI Interface—Virtual forwarding interface name.
Customer Facing UNI—Customer-facing UNI port.
AccessDomain—Access domain name.
NPC—Named physical circuit.
UNI Port—UNI port.
UNI Shutdown—Shutdown status of the UNI port.
UNI Aging—Length of time, in seconds, that MAC addresses can stay in the UNI port security
table.
UNI Speed—UNI port speed.
UNI Duplex—Duplex status (none, full, half, or auto) of the UNI port.
Maximum MAC Address—Maximum MAC addresses allowed on the UNI port.
CDP Shutdown Threshold—Cisco Discovery Protocol shutdown threshold (in packets/second) on
the UNI port.
STP Shutdown Threshold—Spanning Tree Protocol shutdown threshold (in packets/second) on
the UNI port.
VTP Shutdown Threshold—VLAN Trunk Protocol shutdown threshold (in packets/second) on the
UNI port.
CDP Drop Threshold—Cisco Discovery Protocol drop threshold (in packets/second) on the UNI
port.
VTP Drop Threshold—VLAN Trunk Protocol drop threshold (in packets/second) on the UNI port.
STP Drop Threshold—Spanning Tree Protocol drop threshold (in packets/second) on the UNI port.
Recovery Interval—Recovery interval (in seconds) of the UNI port.