Open as PDF
Cisco IP Solution Center L2VPN and Carrier Ethernet User Guide, 6.0
Chapter 8 Managing an L2VPN Service Request
Creating an L2VPN Service Request
Figure 8-17 Select PE Device
This window displays the list of currently defined PEs.
a. The Show PEs with drop-down list shows PEs by customer name, by site, or by device name.
b. The Find button allows a search for a specific PE or a refresh of the window.
c. The Rows per page drop-down list allows the page to be set to 5, 10, 20, 30, 40, or All.
Step 6 In the Select column, choose the PE device name for the L2VPN link.
Step 7 Click Select.
The Service Request Editor window appears displaying the name of the selected PE in the PE column.
Figure 8-18 Select the UNI Interface
Step 8 Choose the UNI interface from the drop-down list.
Note When you provision an L2VPN ERS (EVPL) service, when you choose a UNI for a particular device,
ISC determines if there are other services using the same UNI. If so, a warning message is displayed. If
you ignore the message and save the service request, all of the underlying service requests lying on the
same UNI are synchronized with the modified shared attributes of the latest service request. In addition,
the state of the existing service requests is changed to the Requested state.