Filter
Top Products
8-6
Cisco IP Solution Center L2VPN and Carrier Ethernet User Guide, 6.0
OL-21636-01
Chapter 8 Managing an L2VPN Service Request
Creating an L2VPN Service Request
Figure 8-6 NPCs Created
For ERS (EVPL), ATM, and Frame Relay, the End-to-End Wire Editor window appears. (See
Figure 8-7.)
Figure 8-7 End-to-End Wire Editor
Step 11 The VPN for this service request appears in the VPN field.
If there is more than one VPN, click Select VPN to choose a VPN. The VPN for L2VPN service request
window appears.
Step 12 Choose a VPN Name and click Select.
The L2VPN Service Request Editor window appears with the VPN name displayed.
Step 13 If necessary, click Add AC in the Attachment Circuit AC2 column, and repeat Steps 3 to 10 for AC2.
The End-to-End Wire Editor window displays the complete end-to-end wire. (See Figure 8-8.)