Open as PDF
Cisco IP Solution Center L2VPN and Carrier Ethernet User Guide, 6.0
Appendix B Working with Templates and Data Files
Using Templates with ISC Policies
Step 5 Click the Add button to select a template/data file to associate with the policy.
Note If the device role is specified as U-PE or PE-AGG, templates can be selectively added based on whether
the device has a UNI interface. For details on this feature, see
Selectively Determining Templates for
U-PE and PE-AGG Device Roles, page B-9. The actual steps for adding templates/data files are the same
as in the following steps.
The Template Datafile Chooser window appears, as shown in Figure B-4.
Figure B-4 Template Datafile Chooser Window
This is a standard Template Manager window used to navigate to and choose templates and (optionally)
data files in ISC.
Note The following steps involving the Template Datafile Chooser window assume a familiarity with the
functionality of the window. For additional information about Template Manager and how templates and
data files are created and managed in ISC, see the
Cisco IP Solution Center Infrastructure Reference,
6.0. The steps shown here are for example purposes. You must modify the steps as required for your
environment. For example, you might want to choose only a template file or both a template file and a
data file to associate with the policy. Both scenarios are supported.
Step 6 Navigate to a template in the folder tree and click it to select it.
The template is listed in the right side of the GUI, along with any data files that are associated with it,
as shown in