Cisco Systems OL-21636-01 Security Camera User Manual


 
13-11
Cisco IP Solution Center L2VPN and Carrier Ethernet User Guide, 6.0
OL-21636-01
Chapter 13 Generating L2 and VPLS Reports
Creating Custom L2 and VPLS Reports
VPLS VPN Report
The VPLS VPN report provides a way to track a VLAN ID and/or VFI Name back to the VPN and
customer without having to iterate through every link and every VPN service. Given a VLAN ID or VFI
name, the respective customer and VPN details are displayed in the report.
Click the VPLS VPN Report icon to bring up the window for this report. (See Figure 13-7.)
Figure 13-7 VPLS VPN Report
Filter Values:
VLAN ID—VLAN identification number.
Customer Name—Name of the customer.
VFI Name—Virtual forwarding interface name.
Access Domain—Access domain name.
Output Values:
VLAN ID—VLAN identification number.
SR Job ID—Service request job identification number.
VPN—Name of the VPN.
Customer Name—Name of the customer.
Service Type—Type of service.
VFI Name—Virtual forwarding interface name.
Access Domain—Access domain name.
Provider Name—Name of the provider.
Creating Custom L2 and VPLS Reports
The reports listed in the ISC GUI in the L2 folder are derived from an underlying configuration file. The
file is in XML format. You can access the file in the following location:
$ISC_HOME/resources/nbi/reports/ISC/l2_report.xml
See the “Monitoring” chapter in Cisco IP Solution Center Infrastructure Reference, 6.0 for details on
how to modify report configuration files to create custom reports.