Cisco Systems OL-21636-01 Security Camera User Manual


 
A-15
Cisco IP Solution Center L2VPN and Carrier Ethernet User Guide, 6.0
OL-21636-01
Appendix A Sample Configlets
ERS (EVPL), EWS (EPL), ATM, or Frame Relay (Additional Template Variables for L2VPN, IOS and IOS XR Device)
ERS (EVPL), EWS (EPL), ATM, or Frame Relay (Additional
Template Variables for L2VPN, IOS and IOS XR Device)
Configuration Service: L2VPN/Metro Ethernet.
Feature: ERS (EVPL), EWS (EPL), ATM and Frame Relay.
Device configuration:
The N-PE is a 12.2(18)SXF with IOS for ERS (EVPL), EWS (EPL), Frame Relay service.
The N-PE is a CRS-1 with IOS XR 3.6 or later for ERS (EVPL), EWS (EPL) service; and IOS
XR 3.7 or later for ATM service (ATM port mode).
The U-PE is a 12.2(25)EY4 with IOS for ERS (EVPL) or EWS (EPL) service.
Configlets
Comments These four variables are supported only on the N-PE.
The values will be empty for all other device roles (U-PE, PE-AGG, and CE).
U-PE N-PE
(None) Template Content:
interface Loopback0
description
LocalLoopbackAddress=$L2VPNLocalLoopback
LocalHostName=$L2VPNLocalHostName
RemoteLoopbackAddress=$L2VPNRemoteLoopback
RemoteHostName=$L2VPNRemoteHostName
Configlets:
interface Loopback0
description LocalLoopbackAddress=
192.169.105.40
LocalHostName=cl-test-l2-7600-2
RemoteLoopbackAddress=192.169.105.80
RemoteHostName= cl-test-l2-7600-4