Cisco Systems OL-21636-01 Security Camera User Manual

Cisco IP Solution Center L2VPN and Carrier Ethernet User Guide, 6.0
Chapter 10 Managing a VPLS Service Request
Creating a VPLS Service Request
Creating a VPLS Service Request
To create a VPLS service request, perform the following steps.
Step 1 Choose Service Inventory > Inventory and Connection Manager > Service Requests.
The Service Requests window appears.
Step 2 Click Create.
Step 3 Choose VPLS from the drop-down list.
VPLS service requests must be associated with a VPLS policy. You choose a VPLS policy from the
policies previously created (see
Chapter 9, “Creating a VPLS Policy”).
Step 4 If more than one VPLS policy exists, a list of VPLS policies appears. Choose the button for the VPLS
policy of choice.
Step 5 After you make the choice, click OK.
The new service request inherits all the properties of that VPLS policy, such as all the editable and
noneditable features and preset parameters.
Creating a VPLS Service Request with a CE
This section includes detailed steps for creating a VPLS service request with a CE present. In this
example, the service request is for an VPLS policy over an MPLS core with an ERMS (EVP-LAN)
service type and CE present.
Perform the following steps.
Step 1 Choose the appropriate VPLS policy.
The VPLS Service Request Editor window appears. (See Figure 10-1.)
Figure 10-1 VPLS Service Request Editor