Open as PDF
Cisco IP Solution Center L2VPN and Carrier Ethernet User Guide, 6.0
Chapter 9 Creating a VPLS Policy
Defining an MPLS/EMS (EP-LAN) Policy with a CE
Perform the following steps.
Step 1 Click Next. The window in Figure 9-11 appears.
The Editable check box gives you the option of making a field editable. If you check the Editable check
box, the service operator who is using this VPLS policy can modify the editable parameter during VPLS
service request creation.
Figure 9-11 MPLS/EMS (EP-LAN) with a CE Policy Attributes
Step 2 Choose an Interface Type from the drop-down list.
You can choose a particular interface on a CE, N-PE, U-PE, or PE-AGG interface based on the service
provider’s POP design. The interfaces are:
• ANY (Any interface can be chosen.)
• Port-Channel (A bundle of ports that share the same characteristics—this gives the service provider
the ability to aggregate bandwidth and protection.)