Open as PDF
Cisco IP Solution Center L2VPN and Carrier Ethernet User Guide, 6.0
Chapter 8 Managing an L2VPN Service Request
Creating an L2VPN Service Request
Creating an EWS (EPL) L2VPN Service Request with a CE
This section includes detailed steps for creating an L2VPN service request with a CE present for EWS
(EPL). If you are creating an L2VPN service request for an ERS (EVPL), ATM, or Frame Relay policy,
Creating an ERS (EVPL), ATM, or Frame Relay L2VPN Service Request with a CE, page 8-2.
Perform the following steps.
Step 1 Create the L2VPN service request for EWS (EPL) with CE.
The L2VPN Service Request Editor window appears. (See Figure 8-9.)
Figure 8-9 EWS (EPL) Service Request Editor
Step 2 Click Select VPN to choose a VPN for use with this CE.
The Select VPN window appears with the VPNs defined in the system.
Step 3 Choose a VPN Name in the Select column.
Step 4 Click Select.
The L2VPN Service Request Editor window appears with the VPN name displayed.
Step 5 Click Add Link. (See Figure 8-10.)