Open as PDF
Cisco IP Solution Center L2VPN and Carrier Ethernet User Guide, 6.0
Chapter 8 Managing an L2VPN Service Request
Modifying the L2VPN Service Request
The Template Data File Chooser window appears. (See Figure 8-34.)
Figure 8-34 Template Datafile Chooser
Step 9 In the left pane, navigate to and select a template.
The associated data files are listed in rows in the main window, as shown in Figure 8-34.
Step 10 Check the data file that you want to add and click Accept.
The Add/Remove Templates window appears with the template displayed. (See Figure 8-35.)
Figure 8-35 Add/Remove Templates with Templates Shown
Step 11 Choose a Template name.
Step 12 Under Action, use the drop-down list and choose APPEND or PREPEND.
Append tells ISC to append the template generated CLI to the regular ISC (non-template) CLI. Prepend
is the reverse and does not append the template to the ISC CLI.
Step 13 Choose Active to use this template for this service request.
If you do not choose Active, the template is not used.
Step 14 Click OK.
The Link Attributes with the template added appears. (See Figure 8-36.)