Filter
Top Products
6-17
Cisco IP Solution Center L2VPN and Carrier Ethernet User Guide, 6.0
OL-21636-01
Chapter 6 Managing a FlexUNI/EVC ATM-Ethernet Interworking Service Request
Setting the Service Request Details
• If Use PseudoWireClass is checked, an additional attribute, PseudoWireClass, appears in the GUI.
Click the Select button of PseudoWireClass attribute to choose a pseudowire class previously
created in ISC.
• The Use PseudoWireClass attribute is only available if the MPLS core connectivity type was set as
PSEUDOWIRE in the Service Options window (see
Setting the Service Options, page 5-4).
• Use PseudoWireClass is only applicable for IOS XR devices.
Step 33 Check the AutoPick Bridge Group Name check box to have ISC autopick the bridge group name during
service request creation.
If this check box is unchecked, you are prompted to specify a bridge group name during service request
creation (see the next step).
Usage notes:
• This attribute only displays for IOS XR devices.
• If the AutoPick Bridge Group Name check box is unchecked, enter an bridge group name in the
Bridge Group Name text field.
Step 34 Check the AutoPick Bridge Domain/VLAN ID check box to have ISC autopick the VLAN ID during
service request creation.
If this check box is unchecked, you are prompted to specify a VLAN ID during service request creation
(see the next step).
Usage notes:
• AutoPick Bridge Domain/VLAN ID consumes a global VLAN ID on the device.
• The bridge domain VLAN ID is picked from the existing ISC VLAN pool.
• The AutoPick Bridge Domain/VLAN ID attribute appears for both Cisco 7600 and ASR 9000
devices. It will be displayed only for non-FlexUNI links.
Step 35 If the AutoPick Bridge Domain/VLAN ID check box is unchecked, enter an ID number in the Bridge
Domain/VLAN ID text field.
Usage notes:
• If AutoPick Bridge Domain/VLAN ID is checked, this field is non-editable.
• When a VLAN ID is manually allocated, ISC verifies the VLAN ID to see if it lies within ISC’s
VLAN ID pool. If the VLAN ID is in the pool but not allocated, the VLAN ID is allocated to the
service request. If the VLAN ID is in the pool and is already in use, ISC prompts you to allocate a
different VLAN ID. If the VLAN ID lies outside of the ISC VLAN ID pool, ISC does not perform
any verification about whether the VLAN ID allocated. The operator must ensure the VLAN ID is
available.
• The Bridge Domain/VLAN ID text field appears for both Cisco 7600 and ASR 9000 devices. It will
be displayed only for non-FlexUNI links.
Step 36 For L2VPN Group Name choose one of the following from the drop-down list:
• ISC
• VPNSC
Usage notes:
• This attribute is used for provisioning the L2VPN group name on IOS XR devices.