Cisco Systems OL-21636-01 Security Camera User Manual

Cisco IP Solution Center L2VPN and Carrier Ethernet User Guide, 6.0
Appendix A Sample Configlets
FlexUNI/EVC (User-Provided Service Instance Name, VPLS Core Connectivity)
FlexUNI/EVC (User-Provided Service Instance Name, VPLS Core
Configuration FlexUNI(EVC)/Metro Ethernet.
Feature: FlexUNI/EVC with VPLS core connectivity and user-provided service instance name.
Device configuration:
The N-PE is a Cisco 7600 with IOS 12.2(33) SRB3.
Interface(s): GigabitEthernet7/0/0.
The U-PE is a Cisco 3750ME with IOS 12.2(25) EY2.
Interface(s): FastEthernet1/0/10.
Comments The transport type is VPLS.
The user manually provided ServiceInst as the Service Instance Name. This is pushed onto the
device, where the Service Instance ID is 10.
vlan 452
interface FastEthernet1/0/10
no ip address
switchport trunk allowed vlan add 452
interface FastEthernet1/0/13
no spanning-tree bpdufilter enable
no keepalive
no ip address
switchport trunk encapsulation dot1q
switchport mode trunk
switchport trunk allowed vlan 452
switchport nonegotiate
mac access-group ISC-FastEthernet1/0/13 in
l2 vfi vpls-test manual
vpn id 300
neighbor encapsulation mpls
vlan 500
ethernet evc ServiceInst
interface GigabitEtherne7/0/0
service instance 10 ethernet ServiceInst
encapsulation dot1q 400
rewrite ingress tag pop 1 symmetric
bridge-domain 500 split-horizon
interface vlan500
xconnect vfi vpls-test