Cisco Systems OL-21636-01 Security Camera User Manual


 
7-3
Cisco IP Solution Center L2VPN and Carrier Ethernet User Guide, 6.0
OL-21636-01
Chapter 7 Creating an L2VPN Policy
Defining an Ethernet ERS (EVPL) Policy with a CE
Step 8 Choose the Service Type of the L2VPN policy.
There are four service types for L2VPN policies:
L2VPN ERS (EVPL)
L2VPN EWS (EPL)
Frame Relay
ATM
Subsequent sections of this chapter cover setting up the policies for each of these services.
Step 9 Check the CE Present check box if you want ISC to ask the service operator who uses this L2VPN
policy to provide a CE router and interface during service activation.
The default is CE present in the service.
If you do not check the CE Present check box, ISC asks the service operator, during service activation,
only for the U-PE or the N-PE router and customer-facing interface.
Step 10 Click Next.
The next sections contain examples of setting policies for the service types, with and without a CE
present.
Defining an Ethernet ERS (EVPL) Policy with a CE
This section describes defining an Ethernet ERS (EVPL) policy with CE present. Figure 7-2 is an
example of the first page of this policy.
Figure 7-2 Ethernet ERS (EVPL) Policy with a CE
Perform the following steps.