Filter
Top Products
2-88
Section 2— Control Panel Descriptions
Source Selection
The first two groups of buttons select primary and
secondary (re-entry) video/key sources for PVW,
MASK, and AUX 1-5 output buses.
The re-entry sources are M/E 1 and M/E 2 program outputs
The selected source button is either bright or dim, depending
upon its on-air status. All other buttons in the row are unlit.
Effects Send Buttons
The Effects Send buttons select output of both video
and key sources. Key outputs must be associated
with selected video sources.
NOTE:
The AUX 1-2 EFFECTS SEND ONLY buttons are functional
only when the Effects Send option is installed. (For Effects Send
operation, the system automatically configures the aux bus pair (A/B) as
a video/key pair. It is not necessary to do this in the Aux Bus Format
menu.)
Preview Only Select Buttons
The Preview Only buttons select the desired preview output to
be viewed on the switched preview monitor. When one of the
Preview Only buttons is pressed, the PVW bus delegate button
is automatically selected if it isn’t already on.
Choices available on the switched preview output are M/E 1
Preview output and M/E 2 Preview output
...
Black
M/E 2
Program
...
M/E 2
Key 2
M/E 1
A
M/E 2
Pvw
M/E 1
Pvw