Filter
Top Products
2-49
Effects Memory Subpanel
Effect Editing Controls
The effect editing controls are located at the right side of the
Effects Memory Subpanel.
CLEAR WORK BUFR is used to clear out stored values from the
following switcher memory areas.
1. To Clear Current Working Buffer— except Keyers:
Single press of the CLEAR WORK BUFR button: (E-MEM
Subpanel)
Clears Current Working Buffer (CWB) to user-defined
defaults. The key memory portion of the CWB is unaffected
(for example, video processing or clip and gain). All non-key
memory parameters are cleared for enabled levels.
2. To Clear Current Working Buffer — including Keyers:
Double press of the CLEAR WORK BUFR button:
Same as above, with addition of key memory parameters
being cleared. Crosspoints are unaffected.
Mark Mark
Block
Modify Insert
After
Cut Get Go To
KF
Go To
Time
Copy Put Effect
Dur
KF
Dur
Paste Timr
Cursor
Mark
Cursor
Insert
Before
Clear
Work
Buffer
Const
Dur
Next
Edit
Prev
Clear
Work
Buffer