Filter
Top Products
2-101
Remote Aux Bus Panels
The 3-RU panel (Figure 2-23) has large buttons and is designed for
locations where it is desirable to operate more than one bus. This
panel will normally control all aux buses but can be set up to lock
out specific buses.
As many as 32 Remote Aux Panels can be attached to one
switcher.
Source Selection
The Remote Aux Panels are designed to control 48
inputs (24 unshifted and 24 shifted). For use with the
2200, inputs 1 through 16 and SHIFT 1 through SHIFT 16
will be the active crosspoints. Input buttons 17 through
24 are disabled, as will the M/E 3 and PGM buttons.
Each crosspoint lamp on the 2-RU or 3-RU panel will high tally
when that input is on air. There is an ON AIR lamp on the one RU
panel which will illuminate to indicate that the selected input is on
air. The on-air tally can be permanently enabled on all panels.
Grass Valley Group
SOURCE
DELEGATE
1
2
4
35678
9
10 11
12
13
14 15 16
17
18 19 20 21
22 23
24
SHIFT
M/E
1
M/E
2
M/E
3
PGM
AUX
1A
AUX
1B
AUX
2A
AUX
2B
AUX
3A
AUX
3B
AUX
4A
AUX
4B
AUX
5A
AUX
5B
AUX
6A
AUX
6B
AUX
7A
AUX
7B
AUX
8A
AUX
8B
AUX
9A
AUX
9B
Figure 2-23. 3-RU Remote Aux Control Panel
1
...
24