Filter
Top Products
3-96
Section 3 — Menu Descriptions
Example 1 – Inserting a Pause
1. Press the Keyframe button on the top menu panel or the Time
Cursr
button on the Effects Editing panel to bring up the
Timeline Menu.
2. Recall an empty register or one that you can write over.
3. If in Enable Mode, enable M/E 1, M/E 2, and Bkgd. If in
Delegate mode, delegate M/E 1, M/E 2, and Bkgd.
4. Set up a Timeline Menu similar to that shown above; that is,
with staggered keyframes on the various levels, staggered
independent timeline lengths, and a total of about 8
keyframes. We will discuss adding the pauses in a moment.
(If you don’t know how to set up these timelines and
keyframes, refer to the Effects Editing portion of your User
Guide or Operator’s manual.)
5. Select
DELEGATES in the Timeline Menu if not in this mode
already.
6. Undelegate M/E 2 and Bkgd (in the above example). (Turn off
M/E and Bkgd on the E-MEM panel.)
7. Rewind the effect, then press Next KF to move to Keyframe 2.
8. In the Timeline menu, undelegate the levels you do not wish
to modify, and delegate those levels you do wish to modify.
a. Press PAUSE/NO PAUSE button until the desired state
appears highlighted.
b. Press MOD.
NOTE:
If the pause state of all delegated levels are not identical, neither
PAUSE or NO PAUSE is selectable.