Filter
Top Products
3-44
Section 3 — Menu Descriptions
Press the CONFG button to return to the Configuration menu.
Peripheral Interface Menu
From the External Interface menu press Peripheral I/f> to bring up
the Peripheral Interface menu.
The Peripheral Interface Bus allows communications with
external devices such as a GVG DPM 700 using Peripheral Bus II
protocol. This menu indicates the settings of the baud and parity
for the Peripheral PORT A3 on the Expanded Communications
Module on the back of the frame.
PERIPHERAL INTERFACE MENU
EVEN19200
config/extern if/peripheral if
PERIPHERAL
TRIGGERS>
NONE38400
BAUD PARITY
9600
4800
2400
ODD
NOTE:
The Peripheral Bus port is labelled
"Port A3" on the rear of the frame
electronics.