Filter
Top Products
2-95
Frame Store Subpanel
Open the Aux Bus Shaping menu by pressing Config on the top
menu panel, then select AUX BUS FORMAT> and AUX BUS
SHAPING>
in the submenus.
Set the shaping of the effects send video to SHAPED by selecting
AUX BUS 4 for the Model 4000 or AUX BUS 2 for the Model 2200,
then selecting SHAPED with the VIDEO/KEY FMT button.
In Frame Store loop mode, operation of the Effects Send loop is the
same as for external looping mode (described in the User’s
Guide), except that manipulation of the Keyer output is done on
the Frame Stores panel, rather than by an external Digital Picture
Manipulator.
NOTE:
The Video Store and Key Store need to be unfrozen.
Frame Store Subpanel
The primary functions of the Frame Store option are storage of
still video and key images and creation of dropshadows behind
keys. Controls for manipulation of these functions are found on
the Frame Store subpanel, shown below, and in the Frame Store
menu, described in Section Two.