Filter
Top Products
3-48
Section 3 — Menu Descriptions
4. Turn the Level soft knob to select which E-MEM level will
activate this trigger.
Press EXIT to return to the Peripheral Interface menu.
Press EXIT again to return to the External Interface menu.
GPI Outputs Menu
From the External Interface menu press GPI Outputs to bring up
the GPI Outputs menu.
The GPI Outputs menu allows you to set which E-MEM Level
each of the GPIs is assigned. The default condition is Misc. There
is also provision for setting the length of the GPI signal.
1. Select a GPI by pressing the Select GPI Button until the
desired GPI number shows up in the window.
2. Select the E-MEM level by pressing the E-MEM Level Button
until the desired desired E-MEM Level is highlighted.
3. Turn the Length knob to select the required GPI duration.
GPI OUTPUTS MENU
GPI 7
GPI 6
GPI 5
GPI 4
GPI 3
GPI 2
GPI 1
OFF
config / external if / gpi outputs
PGM CUT
TRIGGER
E-MEM
LEVEL
LENGTH
= 1 Field
GPI 8 7
SELECT
GPI
DPM 3
DPM 2
DPM 1
MISC
DPM 4
5
6
8
7
MISC
MISC
MISC
MISC
4 MISC
3 MISC
2 MISC
1 MISC
LEVEL LENGTH
1
1
1
1
1
1
1
1