Filter
Top Products
3-43
External Interface Menu
Mapping DPM Returns
Complete the DPM Setup by assigning the DPM channel returns.
1. Bring up the Map Inputs menu by pressing the following
buttons: Mixer CONFG,
INPUTS>,
MAP INPUTS>
2. Press a crosspoint button on the M/E 2 B background bus to
select the crosspoint whose input mapping is to be changed.
3. Select LOG CHANNEL with the
LOG/PHYS ASSIGNMENT
button.
4. Rotate the
VIDEO INPUT knob to assign the desired DPM
number and logical channel for this crosspoint. For example,
assign logical channel 1 of DPM 1 by selecting
DPM 1 LOG CHAN 1.
5. Rotate the
KEY INPUT knob to assign the desired DPM
number and logical channel for this crosspoint. For example,
assign logical channel 1 of DPM 1 by selecting DPM 1 LOG
CHAN 1
.
DPM MAP INPUTS MENU
CHANNEL
SELECT
DPM
SELECT
CHAN 2
CHAN 1-PRI
CHAN 3
CHAN 4
CHAN 5
CHAN 6
CHAN 7
SECONDARY
DPM 1
DPM 3
DPM 4
VIDEO INPUT
= 19
KEY INPUT
= 42
DPM 2
CHAN 2
DPM 2
VIDEO INPUT
LOGICALPHYSICAL
KEY INPUT
6
29
-
-
-
-
-
23
63
-
-
-
-
-
19 42
config/extern if/dpm setup/dpm map inputs