Filter
Top Products
3-97
Keyframe Menu
Example 2 – Inserting a Pause
1. Press E-MEM on the top menu panel to bring up the E-MEM
menu, then the soft KF PATHS button in the E-MEM menu to
access the Keyframe Path menu. Note (in the upper right
corner of the menu) that we are still on Keyframe 2 in the
selected register.
2. Select M/E 1 with the SELECT LEVEL button in the E-MEM
Keyframe Path Menu, then turn ON the PAUSE function.
3. Press Last Menu on the top menu panel to return to the
Keyframe Menu.
4. Press Mod. This modifies the selected keyframe (2) on the
delegated level (M/E 1) to now include the programmed
pause.
5. Move to keyframe 4 with the Next KF button and, in the same
manner, add a pause to the BKGD level. (Undelegate M/E 1
and delegate Bkgd.)
6. Note that an easy way to move back and forth between the
Keyframe Menu and the E-MEM Menu is with the Last Menu
button.
7. Press Rewind.
KEYFRAME PATH MENU
ON
WIPEXFORM
HOLD
LINEAR
S-LINEAR
E-MEM / kf path
PAUSE
SELECT
LEVEL
SELECT
GROUP
PATH
TYPE
CONTINUITY
= 0.00
BIAS
= 0.00
Register: 8 Keyframe: 2
TENSION
= 0.00
M/E 2
M/E 3
PGM PST
DSK
MISC
BKGD
DPM 1
DPM 2
DPM 3
DPM 4
TRANSITION
KEY 1
KEY 2
KEY A
KEY B
WIPES
ALL
FSTOREXFRM
M/E 1
OFF
For 2200-2i, delete M/E3,
PGM/PST, DSK; change DPMs
S-LINEAR
LINEAR
S-LINEAR
HOLD
HOLD
S-LINEAR
CURVE
WIPEXFORM
CURVE