Filter
Top Products
3-35
External Interface Menu
For a DPM-700:
1. Set the DPM TYPE to OTHER FIXED.
2. Turn the EFF SEND DELAY soft knob to select 2 fields. It is
important that this be set correctly.
The CONTROL DELAY soft knob has no effect with the DPM-
700.
3. Set PORT ASSIGN to NONE.
4. Set CHANNEL ROUTING to OFF.
For devices which must be set up manually:
1. Program all other required parameters
2. Set EFF SEND DELAY to 0
3. Select BLACK on the Aux Bus feeding the external device
NOTE:
A delay has been introduced when changing DPM TYPE. This
delay allows a new DPM TYPE to be chosen without cycling through
intermediate DPM Types. Once the desired solution has been made, the
new DPM TYPE will be set 2 seconds later.
4. Turn the M/E Effects Send button on and off and look for a
flash of the wrong video (BLACK) as Effects Send is turned
on. (The flash will appear on the M/E output for the Effects
Send you selected.)
5. Increase the EFF SEND DELAY one field at a time until there is
no video flash when turning on Effects Send.
NOTE:
Increasing the EFF SEND DELAY any further will not change
the Effects Send appearance. It will, however, delay the entry into Effects
Send unnecessarily.